Thursday, March 28, 2024     [ login ]
       


Facultad de Ingeniería Mecánica. Universidade Federal de Uberlândia. 

Uberlândia, Brasil.



Responsables del Aula:
Dirección: Prof. Dr. Gilmar Guimarães. 
Vicedirección: Prof. Dr. Sõnia A. G. Oliveira.
Correo electrónico de contacto: gguima@ufu.br

Antecedentes y ubicación:
El Aula FEMEC-UFU-CIMNE (http://www.ufu.br/), creada el 25 de Abril de 2004, se ubica en la Universidad Federal de Uberlândia (Brasil).
El proyecto del Aula se centra en la resolución de problemas inversos aplicados en Ingeniería Biomecánica, el desarrollo de procesos de fabricación y estudio de la superficie de materiales. 
Las actividades del grupo se desarrollan en dos ambientes:
  • Aula FEMEC-UFU-CIMNE
  • LPM- Laboratorio de Proyectos Mecánicos Profesor Henner Alberto Gomide

Femec

Objetivos
  • Propiciar un espacio donde profesores, alumnos (grado y postgrado) posan desarrollar trabajos y investigaciones en el campo de los métodos numéricos.
  • Promover la formación, el desarrollo, la divulgación y las aplicaciones de los métodos numéricos en ingeniería, bien como la cooperación técnico-científica con empresas.
  • Formar recursos humanos a nivel de pre y post grado en el área de los métodos numéricos aplicados a ingeniería.
  • Actuando principalmente en las líneas de Procesos de Conformación, Proyecto Estructural y Biomecánica.
Integrantes del Aula
Femec
Investigadores:

Prof. Dr. Gilmar Guimarães - Director : Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica Transferencia de calor y problemas inversos.
Prof. Dr. Sônia A. G. Oliveira – Vice Director: Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica – Diseños de sistemas mecánicos.
Prof. Dr. Márcio Bacci Universidad Federal de Uberlândia - Facultad de Ingeniería Procesos de Fabricación Mecánica: Mecanizado.
Prof. Dra. Priscila F. Barbosa de Sousa Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica Transferencia de calor e investigación de problemas inversos.
Profa. Dra, Gabriela Lima Menegaz, Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica – Diseños de sistemas mecânicos.
Prof. Dr. Henrique Fernandes - UFU Universidad Federal de Uberlândia - Facultad de Computação Procesamiento de imágenes.
Profa. Dra. Ana Paula Fernandes - UFTM Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica Investigación de Transferencia de Calor y Problemas Inverso.
Prof. Dr. Sidney Ribeiro da Silveira - UEMG. Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica Investigación de Transferencia de Calor y Problemas inversos.
Profa. Dra. Gabriela Costa de Oliveira - UEMG. Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica Investigación de Transferencia de Calor y Problemas inversos.
Prof. Cleudmar A Araújo, Universidad Federal de Uberlândia - Facultad de Ingeniería Mecánica – Diseños de sistemas mecánicos.

Estudiantes de doctorado:

Eduardo Peixoto de Oliveira
Jefferson Gomes do Nascimento
José Ricardo Ferreira Oliveira
José Aguiar dos Santos Jr
Fábio Garcia Temistocles Ferreira
Guilherme Ramalho
Franciane Cristina Rodrigues Carvalho

Estudiantes de Maestría:

Vinícius Soares Medeiros
Estudiante de Pregrado
Alexandre Miguel Costa Barcelos
Pedro Henrique Franco
Iago Smanio Saad

Proyectos de I+D

  • Simulación de deformaciones plásticas en problemas de contacto severo utilizando Método de Elementos Finitos con enfoque dinámico explícito.
  • Desarrollo de una técnica para el uso de escalas geométricas en las simulaciones de la formación de chapa.
  • Desarrollo de un modelo de elementos finitos con integración explícita de tiempo y enfoque de malla de contacto para aplicación en problemas con grandes deformaciones plásticas.
  • Estimación del parámetro de penalty normal en la solución de problemas de contacto por el método de los elementos finitos.
Docencia y publicaciones

1. Artículos publicados en revistas 
  • PEREIRA, I. C.; VIANELLO, P. I.; BOING, D.; GUIMARÃES, G.; DA SILVA, M. B. An approach to torque and temperature thread by thread on tapping. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. , v.1, p.1 - , 2020. https://doi.org/10.1007/s00170-020-04986-8
  • FIGUEIREDO, ALISSON A.A.; FERNANDES, HENRIQUE C.; MALHEIROS, FERNANDO C.; GUIMARÃES, G, Influence analysis of thermophysical properties on temperature profiles on the breast skin surface. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER. , v.111, p.104453 - 104466, 2020. ttps://doi.org/10.1016/j.icheatmasstransfer.2019.104453
  • MALHEIROS, F. C.; NASCIMENTO, J. G.; FERNANDES, A. P.; GUIMARÃES, G. Simultaneous Estimation of Thermal Conductivity and Thermal Diffusivity of Non-Conductive Solid Material Using Measurements From Only One Surface. REVIEW OF SCIENTIFIC INSTRUMENTS. , v.1, p.1 - 11, 2020. https://doi.org/10.1063/1.5122756
  • FIGUEIREDO, A. A. A.; NASCIMENTO, J. G.; MALHEIROS, F. C.; GUIMARÃES, G; FERNANDES, H.; IGNACIO, L. H. S. Breast tumor localization using skin surface temperatures from a 2D anatomic model without knowledge of the thermophysical properties. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE. , v.1, p.1 - 16, 2019. https://doi.org/10.1016/j.cmpb.2019.02.004
  • MENEGAZ, G. L.; GUIMARÃES, G. Development of a New Technique for Breast Tumor Detection Based on Thermal Impedance and a Damage Metric. INFRARED PHYSICS TECHNOLOGY. , v.1, p.1 - 11, 2019. https://doi.org/10.1016/j.infrared.2019.01.019
  • FERNANDES, A. P.; SANTOS, M. B.; GUIMARÃES, G. Use of moving average filter for regularization of the transfer function based on Green’s function method (TFBGF) to solve an IHCP. INVERSE PROBLEMS IN SCIENCE AND ENGINEERING. , p.1 - 22, 2019. https://doi.org/10.1080/17415977.2019.1628740
  • MENEGAZ, G. L.; TSURUTA, K.; FINZI NETO, R M; STEFFEN J.R., VALDER ARAÚJO, A.C.; GUIMARÃES, G. Use of the electromechanical impedance method in the detection of inclusions: application to mammary tumors. Structural Health Monitoring. , v.1, p.1 -16, 2019. https://doi.org/10.1177/1475921718825138
  • RIBEIRO, S.; FERNANDES, A. P.; SAN, J. W.; SILVA, M. B.; GUIMARÃES, G. Estimation of a Moving Heat Source due to a Micromilling Process Using the Modified TFBGF Technique. MATHEMATICAL PROBLEMS IN ENGINEERING. , v.2018, p.1 - 8, 2018. https://doi.org/10.1155/2018/9105940
  • FIGUEIREDO, ALISSON AUGUSTO AZEVEDO; FERNANDES, HENRIQUE COELHO; GUIMARÃES, G. Experimental approach for breast cancer center estimationusing infrared thermography. INFRARED PHYSICS TECHNOLOGY. , v.95, p.100 - 112, 2018. https://doi.org/10.1016/j.infrared.2018.10.027
  • FERNANDES, H.; ZHANG, H.; FIGUEIREDO, A. A. A.; MALHEIROS, F. C.; IGNACIO, L. H. S.; SFARRA, S.; IBARRA-CASTANEDO, C.; GUIMARÃES, G.; MALDAGUE, X. Machine learning and infrared thermography for fiber orientation assessment on randomly-oriented strands parts.. SENSORS. , v.18, p.1 - 16, 2018. https://doi.org/10.3390/s18010288
2. Capítulos de libros publicados

  • FERNANDES, H.; ZHANG, H.; FIGUEIREDO, A. A. A.; MALHEIROS, F. C.; IGNACIO, L. H. S.; SFARRA, S.; IBARRA-CASTANEDO, C.;GUIMARÃES, G.; MALDAGUE, X.
    Machine learning and infrared thermography for fiber orientation assessment on randomly-oriented strands parts.. SENSORS. , v.18, p.1 - 16, 2018. https://doi.org/10.3390/s18010288Artículos publicados en revistas 
3. Otras publicaciones

  • RIBEIRO, S.; OLIVEIRA, G. C.; GUIMARÃES, G. Analitycal impulse response, Identification for a moving heat source problem using Green's Functions. In: COBEM 2019, 2019, Uberlândia. Proceedings of 25th International Congress of Mechanical Engineering. RJ: ABCM, 2019. v.1. p.1 – 8
  • OLIVEIRA, G. C.; RIBEIRO, S.; GUIMARÃES, G. Analytical solution of the direct problem in multilayer heat conduction. In: International Congress of Mechanical Engineering, 2019, Uberlândia. Proceedings of 25th International Congress of Mechanical Engineering. , 2019. v.1. p.1 – 8
  • SOARES, V; OLIVEIRA, J. R. F.; G. GUIMARÃES; FIGUEIREDO, A. A. A. Breast Skin Heating Parametric Analysis and its Effects in Carcinogenic Inclusions. In: 25th International Congress of Mechanical Engineering„ 2019, Uberlândia. Proceedings of the 25th International Congress of Mechanical Engineering,. RJ: ABCM, 2019. v.1. p.1 – 10
  • SAAD, I. S.; GUIMARÃES, G.; ARAÚJO, A.C.; MENEGAZ, G. L. Detection of inclusions in a breast model using thermal impedance method. In: 25th International Congress of Mechanical Engineering, 2019, Uberlândia. Proceedings of 25th International Congress of Mechanical Engineering. RJ: ABCM, 2019. v.1. p.1 – 8
  • MAIA, J. P. V. A.; GUIMARÃES, G.; OLIVEIRA, J. R. F.; ARAÚJO, A.C.; MENEGAZ, G. L. EXPERIMENTAL ANALYSIS OF DIFFERENT PARAMETERS IN THE INCLUSION DETECTION BY THERMAL IMPEDANCE. In: 25th International Congress of Mechanical Engineering Proceedings of 25th International Congress of Mechanical Engineering. ABCM, 2019. v.1. p.1 – 8
4. Directrices y supervisión completadas

Tesis doctorales

Tesis de maestría

Supervisión postdoctoral

  • Ana Paula Fernandes. 2018. CAPES-PNPD-UFU
  • Alisson A. A. Figueiredo -CNPq .2019.
  • Gabriela Lima Menegaz. CNPq. 2020.
5. Directrices y supervisión en progreso

Tesis doctorales

Tesis de maestría


Actividades Académicas
  • Desarrollo de tesis de doctorado y maestría en el programa de Post-Graduación en Ingeniería Mecánica.
  • Desarrollo de proyectos de fin de curso de alumnos de Ingeniería Mecánica, Mecatronica y Aeronáutica.
Procesos de conformación Procesos de conformación  Biomecánica Tribología y problemas
de contacto
Estampación Laminación Parte de un ergometro ajustable
para silla de ruedas
Contacto de una esfera con
distintos planos
Estampacion Laminado Biomecánica